InterPlan Systems News

eTaskMaker Module Updates for March

InterPlan Systems has released the following updated eTaskMaker estimating modules:

  • Agitators (Rev. 5) – (updated) Updated estimating formulas for scaffolding.
  • Air Coolers (Rev. 5) – (updated) Updated estimating formulas for scaffolding.
  • Asbestos Abatement (Rev. 7) – (updated) Updated estimating formulas for scaffolding.
  • Blind Installation (Rev. 6) – (updated) Updated estimating formulas for scaffolding.
  • Block Valves – Welded [PF/BM] (Rev. 14) – (updated) Split into two modules using either pipe fitters or boilermakers.
  • Block Valves – Bolted [PF/BM] (Rev. 14) – (updated) Split into two modules using either pipe fitters or boilermakers.
  • Butterfly Valves (Rev. 4) – (updated) Updated estimating formulas for scaffolding.
  • Cable Tray Installation (Rev. 2) – (updated) Updated estimating formulas for scaffolding.
  • Chain Operators (Rev. 3) – (updated) Updated estimating formulas for scaffolding.
  • Check Valves – (new) Allows for re-aligning the pump after a check valve is (re)installed.
  • Coalescer – Horizontal (Rev. 2) – (updated) Updated estimating formulas for scaffolding.
  • Coke Drum (Rev. 2) – (updated) Updated estimating formulas for scaffolding.
  • Concrete Structure Repairs (Rev. 2) – (updated) Updated estimating formulas for scaffolding.
  • Control Valves (Rev. 9) – (updated) Major revision includes updated estimating formulas, options to send the control valve to be serviced at an outside repair shop and/or to decontaminate the valve.
  • Conveyers – Feeder Screw (Rev. 3) – (updated) Updated estimating formulas for scaffolding.
  • Conveyers – Open Belt (Rev. 2) – (updated) Updated schedule logic network.
  • Cooling Tower Gear Boxes – Fans (Rev. 2) – (updated) Updated estimating formulas for scaffolding.
  • Crystallizer (Rev. 2) – (updated) Updated estimating formulas for scaffolding.
  • Deaerator (Rev. 2) – (updated) Updated estimating formulas for scaffolding.
  • Desalter Feed Water Drum (Rev. 4) – (updated) Updated estimating formulas for scaffolding.
  • Desalters (Rev. 6) – (updated) Updated estimating formulas for scaffolding.
  • Drums (Rev. 11) – (updated) Updated estimating formulas for scaffolding.
  • Ejectors (Rev. 3) – (updated) Updated estimating formulas for scaffolding.
  • Fired Heater Tubes – Stuck Pig Retrieval (Rev. 1) – (updated) Updated estimating formulas for scaffolding.
  • Fired Heater Tubes Decoking (Rev. 3) – (updated) Updated estimating formulas for scaffolding.
  • Flanges [PF/BM] (Rev. 5) – (updated) Split into two modules using either pipe fitters or boilermakers.
  • Flare – In Situ (Rev. 3) – (updated) Updated estimating formulas for scaffolding.
  • Furnace – Blower (Rev. 2) – (updated) Updated estimating formulas for scaffolding.
  • Furnace – Stack Repairs – (new) Allows for the removal of spalled lining (refractory brick) in concrete stacks.
  • Hot Taps (Rev. 2) – (updated) Updated estimating formulas for scaffolding.
  • Nozzle Installation on Vessel (Rev. 6) – (updated) Improved estimating formulas; accounts for welding different metallurgies.
  • Pipe Clamps – (new) Covers all tasks to remove a pipe clamp, inspect and repair the damage.
  • Pipe – Cr(VI) – Field Erection – (new)
  • Reactor – Alkylation (Rev. 4) – (updated) Updated estimating formulas.
  • Scaffold Erection (Rev. 2) – (updated) Updated estimating formulas.
  • Tank Roof Repairs (Rev. 2) – (updated) Updated estimating formulas for scaffolding.
  • Tanks (Rev. 7) – (updated) Updated estimating formulas for scaffolding.

eTaskMaker clients may now download the updates from our downloads repository.